Brakes & hydraulic system

Technological lead in the field of braking systems for shaft hoisting and inclined conveyor systems thanks to innovative milestones and continuous further-development of our modular building-block principle specifically for applications in compliance with highest security standards.

Stringent safety requirements for shaft hoisting systems

Winders are machines requiring a high degree of safety and reliability that convey loads and travel long distances at high speeds. Not only do they convey material and raw materials but, depending on the shaft system, also large numbers of people. To be able to guarantee safe and reliable operation, appropriate safety equipment must be incorporated. Disk brake equipment by SIEMAG TECBERG is an integrated and important component of winders and guarantees secure braking both for safety braking under normal operating conditions and in emergency situations.

Individually tailored solutions

Every braking system is individually designed for a particular shaft system, in compliance with the applying standards and regulations. The braking system essentially consists of brake posts, own-developed brake units, hydraulic units and electro-hydraulic brake control systems. 

Brake posts and brake units

The brake posts, which are adapted to fit the respective winder, are fitted with proprietary-developed type BE brake units (see table) approved as component parts in compliance with the German Mining Regulations for Shaft Hoisting and Inclined Conveyor Systems (Bergverordnung für Schacht- und Schrägförderanlagen, BVOS). The brake units transmit the braking force to the brake disk(s) of the rope carrier. The braking force is applied under constant control to protect the hoisting equipment and, on KOEPE hoisting systems, to prevent rope slippage. Braking force is generated by means of pretensioned springs and opened hydraulically, so that in the event of an interruption or breakdown the system can also be brought to a halt without the use of electrical power. Both, wear on the brake linings and spring breakage are monitored and indicated.

Performance data of our brake callipers

    Brake unit pair

    BE 050

    BE 065  

    BE 100 

    BE 125

    Contact pressure [kN]

    2 x 50

    2 x 65

    2 x 100

    2 x 125

    Nominal air gap [mm]





    Brake unit pair

    BE 200

    BE 250

    BE 300  

    BE 350 

    Contact pressure [kN]

    2 x 200

    2 x 250

    2 x 300

    2 x 350

    Nominal air gap [mm]






    Technical features

    • High braking force
    • Unlimited service life – more than 2 million load changes during standard hoist runs
    • Low surface compression on the brake linings
    • Stepless, free of play fine adjustment
    • Fully enclosed against dirt and aggressive materials and substances
    • Monitoring of wear and spring breakage
    • Maintenance-friendly
    • Approved as BVOS-compliant component parts by German Mining Authority

    Hydraulic units

    Oil pressure generation, control block, valve fittings and the reservoir for adjustable pressure are compactly arranged in the hydraulic unit. The pipework to the brake posts is made from thick-walled pipes with a large cross-section.

    Electro-hydraulic brake control systems

    SIEMAG TECBERG GmbH’s electro-hydraulic brake systems are a component of the disk brake equipment on hoists and fulfil a number of functions there:

    • Holding brake: 
      When the winder is at a standstill, the system is depressurised and the brake actuators apply full braking force to the disk brake
    • Drive brake: 
      During normal hoisting operation manual braking force control is possible by means of a hand lever on the control desk
    • Safety brake: 
      The safety brake is activated when triggered by emergency-off or through a fault in the hoisting operation

    Activation of braking force for safety braking to a great extent determines the type and design of an electro-hydraulic brake control system:

    • Constant braking force for simple applications and at a hoisting speed of maximum 4 m/s
    • Constant braking force at a hoisting speed of more than 4 m/s
    • Constant retardation at a hoisting speed of more than 4 m/s

    The electronically regulated electro-hydraulic brake control system is a closed system, which is independent from other control systems, used on the hoisting system. It is housed fully wired in dust-tight switch cabinets. Control and monitoring of the system are done by means of redundant PLC technology. The clearly defined interfaces to the winding machine control system are fitted with plug contacts.

    Workshop assembly with pre-commissioning

    The complete disk brake system, including pipework, is constructed at our workshop and is function-tested and pre-set before despatch. Therefore assembly, installation and commissioning are trouble-free, and reliable operation is guaranteed by SIEMAG TECBERG braking systems.

    Any questions?

    Contact us – we would be pleased to help you.
    Phone:+49 (0)2773 9161-0

    These products might interest you

    See for yourself the advantages of our other products


    System integration and expertise for complete systems


    Discover SIEMAG TECBERG’s tailor-made products and customised solutions for the shaft-hoisting technology as shown in our animated application.